12V 38AH Lead Acid emergency Lighting Battery with long use life
Detail Specifications:
|
Nominal Voltage
|
12V
|
|
Rated capacity(20 hour rate)
|
38AH
|
|
Dimensions
|
Length
|
197±1mm(7.76inches)
|
|
Width
|
166±1mm(6.50inches)
|
|
Height
|
170±1mm(6.69inches)
|
|
Total Height
|
170±1mm(6.69inches)
|
|
Weight Approx
|
12.0Kg(27.56lbs)
|
Main Features:
1.Low self discharge: lower than 3% of rated capacity per month under normal operating temperature
2.ABS case (can be made with flame retardant V0)
3.No memory effect after repetitious usage or discharges
4.Maintenance-free operation
5.Sealed construction and leak proof
6.Safety valve regulated system
7.Operating in any position
8.Deep discharge recovery
Applications:
1.Computers and uninterrupted power source (UPS)
2.Power transmission and transformer station, switch control and accident lighting
3.Fire fighting, safety device and alarm monitoring
4.Aviation, spaceflight and power storage
5.Automatic office system
6.Radio communication system
7.Emergency lighting and car and ship starting system
8.Portable electric appliances and mining system
9.Traffic and navigation signal lamp
Warnings
Matrix series batteries have acid in the case and are fully charged before leaving factory. Do not attempt to dismantle the battery, if accidental skin/eye contact is made with electrolyte, seek medical advice immediately.
Do not use a new battery with an old one.
Do not use the battery in sealed container.
Each battery should have detailed record including the ex-factory date, installing date and using record.
Check the connection of wire in a fixed interval (once a year). If there is any looseness should tighten the wire.
Wipe the surface of the battery with soft cloth in a fixed interval (once three months) and always keep the battery clean.
Avoid using any kind of organic solvents for cleaning the surface of the battery.
